Generate QR code
Open Access
Subscription Access
The dependence of coordinate measurements error of the geometric elements shape characteristics of products on the control points number
https://doi.org/10.32446/0132-4713.2021-3-4-21
Abstract
The issues of estimating the error of coordinate measurements of the shape characteristics of geometric elements of products depending on the number of control points, taking into account a given confidence probability, are considered. Analytical models are proposed for estimating the error based on a priori data, similar to estimating uncertainty by type B. The correspondence of model and experimental results is verified by the Monte Carlo method using a specially developed program in VBA and the library functions of the Statistical Analysis package of the Microsoft Excel program. Such a characteristic of the shape of the part as roundness is investigated. The influence of the parameters of regular structures associated with the features of the technological processes of manufacturing the part on the parameters of the distribution function of the coordinates of the control points is revealed. Fourier analysis is used to identify and quantify regular structures on the surface of the part. The sources of error that have a significant impact on the results of measurements of the shape characteristics of geometric elements of products are given. Based on the results of statistical calculations, the dependence of the measurement error of the shape characteristics on the number of control points is analyzed, the scope of application of analytical formulas for estimating the error of single measurements for a given confidence probability is determined. The article is intended for specialists in the field of practical coordinate metrology and related fields.
About the Authors
M. F. Danilov
Scientific Research Institute for Optoelectronic Instrument Engineering
Russian Federation
Russian Federation
Mikhail F. Danilov, Sosnovy Bor, Leningrad region, Russia
A. P. Ivanova
Scientific Research Institute for Optoelectronic Instrument Engineering
Russian Federation
Russian Federation
Alina P. Ivanova, Sosnovy Bor, Leningrad region, Russia
References
1. Danilov M. F., Ivanova A. P., Savelieva A. A., Measurement Techniques, 2018, vol. 61, pp. 238–243. https://doi.org/10.1007/s11018-018-1415-4
2. Cheveleva А. О., Bolotov М. А., Research of technological heredity influence on setting of procedure of measurements on coordinate-measurement machine in case of out-of-flatness detecting for aircraft engineering parts, Vestnik samarskogo gosudarstvennogo aerokosmicheskogo universiteta im. akademika S. P. Korolyova, 2012, no 5, pр. 118–124. (In.Russ.)
3. Selivanov M. N., Friedman, A. E., Kudryashova J. F. Kachestvo izmerenij, Metrologicheskaya spravochnaya kniga [ Measurement quality, Metrological reference book], Leningrad, Lenizdat Publ., 1987, 295 p. (In.Russ.)
4. Flack D., CMM measurement strategies, NPL Measurement good practice guide, no. 42, 2001, National Physical Laboratory, UK, 99 p.
5. Maheshwari N., On the selection of CMM based inspection methodology for circularity tolerances, Elseiver, 2001, 58 p.
6. Serenkov P. S., Application of nonparametric models for uncertainty estimation of results of measurements, Vestnik of Belarusian-Russian University, Instrument Engineering, 2015, no. 3 (48), pp. 109–115. (In.Russ.)
7. R. G. Wilhelml, R. Hocken, H. Schwenke, CIRP Annals, Manufacturing Technology, 2001, vol. 50, iss. 2, рp. 553–563. https://doi.org/10.1016/s0007-8506(07)62995-3
8. Kononogov S. A., Lysenko V. G., Koordinatnaya metrologiya: Monografiya [Coordinate metrology], Moscow, ASMS, 2010, 380 p. (In.Russ.)
9. Sachs L., Statistische auswertungsmethoden, Berlin, New York, Heidelberg, Springer-Verlag, 1972, 548 рp. https://doi.org/10.1007/978-3-662-10037-0
10. Wenzel V. I., Danilov M. F., Savelieva A. A., Semenov A. A., Application of coordinate-measuring machines for assembling axisymmetric two-mirror lenses with aspherical mirrors, Journal of Optical Technology, no. 2, 2019, рp. 68–73. https://doi.org/10.17586/1023-5086-2019-86-02-68-73 (In.Russ.)
11. Dwight H. B., Tables of integrals and other mathematical data. Fourth edition, New York, The Macmillan company, 1961, 228 pp.
Review
For citations:
Danilov M.F., Ivanova A.P. The dependence of coordinate measurements error of the geometric elements shape characteristics of products on the control points number. Metrologiya. 2021;(3):4-21. (In Russ.) https://doi.org/10.32446/0132-4713.2021-3-4-21
Views:
393
